This practical unit is an ideal product for many commercial and recreational activities. It is especially suited for:
- Councils and Government Departments
- Rally Drivers
- 4WD Enthusiasts
- Agricultural use (Farmers, contractors, etc)
- Mining and exploration operators
- Business owners
- Tour Operators
The Unit features:- Dual trip and speed readouts to 1 metre increments
- Simple fitment to all vehicles with adjustable screw-mount or suction windscreen mount
- Ease of operation
- Latitude and Longitude Display
- Speed display function
- Highly visible sunlight readable display
- Kilometers, Miles and Nautical Miles
- External reset switch
- Optional trip freeze function
Unit Characteristics:- 110mm(width), 75mm(height), 25mm(depth); face 100mm wide
- Antenna: 51mm (L), 42mm (W), 14mm (H)
- Antenna cable length: 3-5m
- Input voltage: 10V to 36V
- Power consumption: maximum 1.8W (110mA @ 12V), including antenna
- Battery backup: > 20 days
For more information
Call 4WD World on 1800 807 176
or Email using the below form
Detailed InformationDesigned for harsh automotive environments, the module features a tough fascia with integrated buttons and LCD graphics display. An adjustable screw or suction mount allows for optimum positioning for the operator.
The ability to track 50 satellites simultaneously, enhanced receiver sensitivity and active antenna result in fast time-to-first-velocity-calculation as well as the ability to operate in the harshest RF environments such as canyons and cities. Speed errors will occur in RF blackout zones such as tunnels. Distance lost due to RF blackout is compensated for by adding it to the total distance recorded once satellites become visible again.
Three dimensional velocity calculations are typically accurate to 0.36km/h and are updated 4 times per second. In application measurements of distance have typically resulted in accuracies of better than 0.25% over 1km. For best accuracy, the vehicle should be moving at a speed of greater than 2km/h.
Two trips are displayed simultaneously as well as current speed and the number of satellites currently being used. Trip statistics such as average speed, maximum speed and trip time can be viewed via the integrated menu. The display is highly visible both at night and in sunlight due to the use of an industrially rated, transflective graphics LCD display.
An external switch is provided that allows reset of trip A when pressed. Optionally, a freeze function can be enabled so that trip A freezes instead of resetting when the switch is pressed. The trip distance continues to be calculated, whilst the display is frozen and will be displayed as soon as freeze is released by pressing the switch again. If the external switch is pressed and held for 5 seconds, trip A will reset. The integrated keypad and menu allows for customisation of these and other functions.
The unit is provided with a 1.5m power cable terminated in a standard automotive cigarette-lighter connector. An external antenna is provided, which can be either magnetic mount or bulkhead mount. The bulkhead mount antenna would only be used in permanent installations.