TRAVEL EVERYWHERE WITH AN INSTANT HOT WATER SYSTEM
Unlimited pressurised hot or cold water.The GLIND AUSSIE CAR & BOAT SHOWER guarantees the luxury of a refreshing hot or cold shower wherever you are ... the outback, the beach, camping or touring.Use salt or fresh water, straight from river, creek, dam, lake, sea, on board tank or water container.
Suitable
for use on 4, 6 and 8 cylinder petrol and diesel engines, family car,
4WDs, trucks, buses, inboard boat motors, earthmoving equipment, tractors,
generators, etc.
- Great for that refreshing hot shower.
- Ready to use at the flick of a switch.
- Only two hoses to carry.
- Easy to wash your vehicle.
- Easy to fill containers.
- Great for washing up.
IT WORKS LIKE THIS:
A robust 12 volt marine pressure pump is mounted in the vehicle, and draws water from any source - a bucket, tank, creek, lake, etc.
The water passes through a compact (30cm x 8cm) heat exchange unit installed in the vehicle's heater system. It does not mix with the radiator water or coolant.
IT'S EASY TO USE:
Only 2 minutes to set up. Start the vehicle's engine, and when it reaches normal operating temperature (two to five minutes) the shower system will produce a good strong flow of hot water, limited only by the supply.
Connect the suction hose to the filter. Screw on shower hose to the heat exchanger. Turn on the car heater control and then switch on pump.
The result is incredible ... as much hot water as the supply will give.
Temperature is controlled by any or all of three methods ... adjusting tap on shower rose, increasing or decreasing engine revs or altering heater control on dash.
IT'S EASY TO FIT
Eighty percent of units sold have been fitted by the owner. The average handyman takes approximately two hours. Easy fitting instructions are supplied to mount the heat exchanger permanently in the vehicle's heater feed line.
The pump is also permanently mounted in the vehicle, using fittings supplied.
This quality Flojet marine self-priming pressure pump (35 psi) has a recommended retail price of $170 Australian and that's for the pump only.
The pump will draw water from 12 metres horizontally and has a two year warranty.
To satisfy the enormous demand from boating people for a hot shower, Glind Pty Ltd now supplies a marine version of this patented heat exchanger. This ensures there is no corrosio9n in the marine environment - all fittings are made of marine bronze (Australian Standard 486).
GLIND has sold thousands of units in Australia, Japan and USA and has built an enviable reputation for quality and reliability.
CHANGING VEHICLES?
Simply transfer the shower!
THE COMPLETE GLIND AUSSIE CAR & BOAT SHOWER CONTAINS:
- Full fitting instructions
- Head exchanger, mounts & bolts, shower rose & 2½ metre hose
- 12 volt marine pressure pump, switch, wiring, fuse, rubber mounts and bolts
- 3M hoses and 6 clamps
- Filter
The Glind Aussie Shower comes in kit form. Components are available as individual items.
HOT WATER STORAGE ... CAMPER VANS, MOBILE HOMES AND BOATS
Glind can thermostatically control the temperature of storage water which is heated while travelling, thus providing instant hot water at journey's end.
For further information or to order this product click here
HOW DOES GLIND COMPARE TO THE COMPETITION?
Click here to find out
Manufactured in Australia by:
GLIND PTY LTD
(sole holders of Australian patent).
www.glind.com.au
2 year warranty on Heat Exchanger and Pump.
Top
