SELF-TAPPING, SELF-LOCKING THREAD REPAIR INSERTS
- Self-tapping, self-locking - quick and easy to install. No
special taps or tools required. Simply install using a nut and
bolt as per diagram, saving in down-time and expensive kits.
- Super strong (case hardened to 60 Rockwell cutting into steel,
copper, bronze, brass, cast and alloys etc., with ease).
- Corrosion resistant (all inserts are zinc and cadmium coated).
· Big range in UNC, UNF and metric up to M30, and even this large
thread repair can be done for around $60.00.
NOTE: CAN USE FOR CAST IRON, ALUMINIUM,
COPPER, BRASS, BRONZE, STEEL, ETC.
SEAL-TABS
The fastest and easiest way to seal and prevent leaks in all automotive
and commercial cooling systems. This inexpensive capsule or tablet
forms a permanent seal and has no downside. It is compatible
with all additives and definitely does not clog up water pumps,
heater cores or thermostats. Every water-cooled engined should have
one, for effective preventative maintenance. Seal-Tabs will
remain effective in the cooling system for up to two years if you
don't change the water.
FLUID WELD
An amazing, space age sealant that comprehensively outperforms all
other anaerobic, expoxies and silicones available today. Fluid
Weld withstands temperatures up to 3000 degrees F (1660 degrees
C). It has 1,001 uses for repairing fine cracks, pin holes and porosity
in cast or aluminium heads, blocks and general castings. Excellent
when installing welsh plugs and valve seat inserts, and a proven
method for fixing cracked exhaust manifolds. Most repairs will use
only $2 to $3 worth of Fluid Weld.
T.M.T. LUBRICANT
Tap, machine and tool lubricant, T.M.T. is not only
a lubricant but also a superior penetrant, rust remover, rust and
corrosion inhibitor and moisture displacer. It is 100% pure synthetic,
leaves a dry surface and repels dust and lint. It withstands temperatures
from minus 100 degrees F to plus 500 degrees F. T.M.T. is
also odourless and doesn't stain. It sinks into the pores of metal,
reducing surface tension and practically eliminating friction and
reducing wear, which adds years to the life of your valuable tools
and equipment.
GRIP
A high strength, high temperature resistant anaerobic sealant/retaining
compound, that locks, seals and retains a wide range of parts such
as studs, screws, bolts, nuts, fittings, bearing, valve seat inserts,
valve guides, cylinder sleeves, injectors, gears, keyways, collars,
hydraulic fittings, pulleys, etc. Grip prevents leaking, contamination
and corrosion, and also stops loosening from vibration. Fast curing,
no mixing and easy application. It fills voids (0.015") and temperature
range from minues 76 degrees F to plus 500 degrees F.
 COLD
WELD STITCHING KIT
Simply the finest repair process on the market today! With this
process, you can guarantee perfect, permanent, invisible repairs
to cracked or broken engine blocks, cylinder heads or any other
cast iron or cast aluminium automotive, marine and industrial casting.
By using the exclusive Seal-Lock high temperature resistant tapered
repair plugs and Seal-Lock special sealants, you can be guaranteed
of perfect results at a very reasonable price.
REPAIRS WILL BE:
- Permanent, leak-proof and invisible
- Water and pressure tight
- Resistant to extremes int emperature
- STRONGER than the original casting
| Seal-Lock Kits contain: |
- 200 plugs
- Titanium nitride taps and drills (2 sizes)
- All sealants
- Inexpensively priced at around $500
|
Think of all those expensive repairs
you can now do yourself!
For further information on this product call
QMR Auto Parts on 1300 880 304
or
Click here to visit their page
|
Top
